It is quite crucial for the employers to set up a safe and proper work environment to get the best production from them. They should have a safe workplace which does not let the employees fall off the overhead platforms or even fall into the holes of walls or floors mapping when working on a height. Falling from a certain height may make them unable to work again or sometimes it ends at death. It not only harms the employees and their families but also damage the reputation of a construction company.
This is quite important that the employees are briefed about the guidelines of height safety and fall protection solutions before they start working. It is crucial that fall protection is provided at elevations which are well above than four feet off the ground in the industrial workspaces. The same should be applied when it comes to shipyards where employees have to work at or above five feet from the ground, in the long-shoring operations. The fall protection should be given at or above eight feet in this case. In the construction industries it should be at 6 feet or above.
There are certain rules that need to be maintained when it comes to height safety and fall protection solutions so that they are implemented in a proper manner. Employers must make sure that a proper protection is provided to their employees when they are working over or around any dangerous machineries or equipments which can pose a threat to their life. Some of the important things that must be kept in mind while considering the safety of the employees are:
- Providing a toe board and a guard rail around any platform which is open at the side and elevated in nature.
- It is quite crucial to guard any hole in the floor where any employee might accidentally walk into and be involved in an accident.
- No matter the elevation or the height of the workspace, it is crucial that the employers provide the necessary safety features such as a guardrail or toe board in order to prevent their workers from getting into any accident.
- Other necessary features which are inclusive in fall protection are safety harnesses and safety lines. Stair railings, safety nets and handrails are also some of the most important things that are often included in fall protection systems.
The floors of the workspace should be kept free of any dirt or grime – work area should always be clean and pristine. Providing protective equipment to the workers is also quite crucial.
Steps To Protect Worker From Any Fall There are various different ways which can be followed by employers in order to protect their employees from any accident.
Height safety and fall protection solutions by OSHA makes it mandatory for the employers to use conventional methods such as safety net systems, guardrail systems, adopting a safer workspace, provisioning an appropriate training to the employees about the work etc.
The use of designated areas along with warning lines, control lines etc are some of the guidelines which are provided by OSHA in order to minimise the accidents that occur. To maintain the Height safety and fall protection solutions the construction companies hire or buy the essential tools from different companies.
The tools should be good in quality and taken from the reputed companies to ensure the protection of the employees.